Should You Wash Wood After Sanding

Steps to take for cleaning wood before staining is similar to painting.
Should you wash wood after sanding. If not return to the sanding stage to get it right. This will keep the dust from your hair and clothing out of the wet finish. Lastly before you stain its a good idea to use tack cloths to clean every last bit of dust off the prepped wood surface.
There are approved methods you can use to clean the dust before applying a polyurethane sealant or staining the surface. After stripping paint from wood you are left with leftover stripper residue that needs to be cleaned up before you can move onto any staining or painting. Tack cloth is a cheesecloth-like piece of fabric thats coated in a.
Then blot it dry with. If you seek a perfect finish make sure the tack cloth glides smoothly over the wood as you wipe. If your pressure treated wood has previously been sanded you may have to deal with how it looks until you decide to change the wood or cover it with a thicker or opaque stain which I dont recommend unless you want to deal with a peeling.
Wood dust from sanding will cause problems if its not removed from the surface before staining. However the pressure that you need to wash the surface of your deck must not be more than 1500 pounds per square inch PSI. Yes you can pressure wash your deck.
Wipe With Denatured Alcohol Many woodworkers end the wood preparation step with the tack-cloth wipe-down but for the very best results conclude your preparation by wiping down the surfaces with a clean cloth moistened with denatured alcohol. There are a few different ways you can remove this residue but through trial and error the most effective way for me has been through the use of mineral spirits and steel wool. Tack the floor with a DRY lint-free rag or towel.
Mineral spirits will provide your wooden surface a deep cleaning while helping to remove any remaining dust. For this reason you should plan on sanding your wood deck after power washing and before staining and sealing. Dont want to mash any of the dirt into the remaining finish.