How To Use Carbide Wood Turning Tools

Once youve got it lined up the way that you want it use the inside of the carbide insert as a guide and scratch a circle into the steel tool shaft.

How to use carbide wood turning tools. If the tool is installed facing down the tip should be lower than the center point by this distance. Repeat with the second blank. Since these are more of a scraping tool than a shearing one you will have more sanding to do.

When turning wood bowls this is primarily a problem in the trouble zone areas. In use you angle the tool so the bevel rides the wood then tilt the handle up to begin the cut. Turn a tool handle epoxy the handle and metal bar together and youve got yourself a new tool.

Carbide tools are introduced to the wood at a 90 angle. If the tool is installed upward the blade tip should be higher than the center point workpiece by this distance. You must use care when handling them so that you dont cut yourself.

Carbide turning tools are more forgiving than traditional woodturning tools and when Im a little unsure of sticking my nice Sorby bowl gouge into a. Carbide turning tools can be used for both spindle and bowl turning. Carbide wood turning tools dont leave as much of a smooth surface as traditional woodturning tools.

I made sure to keep the bar cool by dipping the rod into a cup of water everytime the metal started to change colour or when I. I then used a file to make it as flat as I could and a little shaping on the bench grinder to make sure the carbide insert is the actual thing that will cut the wood not the steel bar. The carbide insert tool should be at center and parallel to the ground With a firm grip on the tool place it on the toolrest and advance it until it contacts the wood.

Be aware that the carbide inserts are razor sharp. The round shaped carbide tool works well for the bowl interior but not well on the exterior. With carbide tools right you keep the tool.