How To Prep Wood For Sanding

Wood covered in an old undamaged varnish Ensure that you remove any flaky parts and then roughen the entire surface to enable better keying.

How to prep wood for sanding. Mount 7-inch sanding discs onto it for sanding the primary surfaces and then switch to 5-inch sanding pads for. It is the primary tool to clean the woodwork. If it snags youll need to re-sand the area.

To remove those last bits of finish palm sand with medium sandpaper 150 grit until you see the bare wood. Also the brush fibers could clean dust from tricky holes or corners. You want to remove any old paint flakes or dust thats been left on the surface.

Watch cabinetmaker Steve Maxwell explain the method he uses for prepping wood for a flawless finish. Wipe down the whole surface with a tack cloth to remove any dust from sanding. Allow the dampened wood to dry 30 minutes before the final sanding.

Wash the entire wood surface once youre finished scraping andor sanding. Prepare for Sanding Floorboards. This is a necessary step as you do not want the sanding machine to catch these nails and cause more damage to your floor and the sanding machine.

There are few steps to follow to ready the wood for painting once you are done with sanding. Start with a quick tidy-up by running the hoover over the floor. Wet the wood and sand it one last time with 200-grit sandpaper.

This will clear the area of larger debris making it easier for you to see any areas of damage. Then switch to fine sandpaper 200 grit until the entire piece is uniform. Next deal with any nails sticking up above the surface of the wood.