How To Prep Wood For Painting After Sanding

Pound-in any protruding nail heads.
How to prep wood for painting after sanding. While you can use any cloth to do this a tack cloth will pick up the most dust. It is the primary tool to clean the woodwork. When lightly wiped over wood surfaces it miraculously picks up dust that vacuuming and dry cloths cannot remove.
Work a paint scraper from every direction keeping the blade flat against the wood so you dont create gouge marks. Wood dust from sanding will cause problems if its not removed from the surface before staining. Once the patch is dry shaped and sanded prime it to protect it from moisture.
Dry rags or brushes arent the most effective tools for removing dust. A tack cloth is really just a piece of loosely woven cheesecloth impregnated with beeswax. While blowing the dust off with compressed air removes the dust it also mixes it into the air so some of it can settle back onto the surface and so you can breath it.
How to Prep Sand and Prime Furniture for Paint. Primer isnt meant to cover completely its okay for the wood to show through. Pour the mineral spirits over the stripped area and use the steel wool to wipe away any remaining stripper residue be sure to follow the wood grain.
The hand brush will. If you dont wipe down the wood. After youve sanded the wood go over it with a rag to wipe it down and remove any excess material.
Use a scraper to remove loose paint from the siding working from every direction. Before painting wood siding fill large holes and gouges with a two-part resin filler such as Minwax High Performance Wood Filler. You have to mix these setting types of fillers but they stick better to wood than other fillers.