How To Prep Wood For Paint After Sanding

Once you are done with that bring in tack cloth to give proper finishing to the cleaning procedure.

How to prep wood for paint after sanding. Dont sand all the way to bare wood just enough to remove any shine. Work your way from the top to the bottom. This way you wont need sanding.

Pound-in any protruding nail heads. Timing is critical when using a paint stripper. Use a scraper to remove loose paint from the siding working from every direction.

On certain woods such as oak and ash pre-wet the wood with a damp cloth to raise the grain before final sanding. After stripping paint to properly clean the wooden surface use mineral spirits and fine steel wool. Ensure you rinse the rag between passes which also serves to remove all debris left behind from the sanding process.

Then use a vacuum or blower to get rid of dust from tricky spots. Before sanding scrape loose and flaking paint from the siding. Optional pre-wetting of the wood when using waterbased finishes.

Using 150-180 sandpaper give the piece a light sanding. If your project is for inside an oil-based primer will penetrate the wood best but if its. However you can use any deglosser for 15 minutes wipe the surface to prepare the surface for painting.

Steps to take for cleaning wood before staining is similar to painting. Sand down the edges of bare spots. Apply oil-based paint primer.