How To Prep Stained Wood For Painting

Some DIY experts say its possible but we suggest sanding the wood for the best results.

How to prep stained wood for painting. After this use a clean rag and wipe off any stain thats pooling on the wood. When it comes to sanding stick with 150g 220g sand paper. Apply multiple coats of stain to the wood as necessary to get the darkness you are looking for.

The next step to preparing the stained wood is washing it. Sanding across the grain will create scratches that will absorb stain and polyurethane unevenly. Using a paint brush or a rag apply an even layer of stain on the woods surface.

To sand and prepare wood before staining first identify the type and grit of sandpaper to be used. Adding a Clear Coat Varnish. A block of regular dish soap works great.

Use latex primer and paint when painting over a water-based wood stain. You dont have to worry about being neat or applying stain in the direction of the grain. In addition you can use a foam roller to cover wide surfaces brush for narrow or hard-to-reach surfaces.

Sand the wood twice with a medium grit sandpaper 100 to 120-grit and twice with a fine grit sandpaper to remove any imperfections and prepare the surface for stain. Paint the woodwork with an oil-based primer to seal the surfaces and prevent the stain. Dont rush things youll be fine.

If the woods pores are open the stain. Paint adheres well over water-based stain so after completing the prep steps outlined above apply a. Protect Surfaces With Painters Tape Cover the surfaces you dont plan to paint with painters tape.