How To Make A Wooden Lathe Stand

I used my angle grinder with a thin blade to make all of the cuts and then did a dry fit before welding the parts together.

How to make a wooden lathe stand. The stand is made of 2x10 dimensional pine cut glued and planed to shape. I Hope You Enjoy This Vid. Anyone can build this wood lathe stand with minimal materials and tools.

Then screw two long pieces of wood to both sides of the plywood. The parts are cut at 5 degrees to match the angle on the legs. I then chop off one end of each leg to have a clean and squared end.

Milling the Apron and Top for the Lathe Stand. How to Build a Mobile Lathe Stand Step 1. The drawing was a great help when I cut out the parts.

Plywood and solid maple. Just make sure to run all four legs through at once so you ensure each one is cut to the same dimensions. Measure the length from your elbow to the ground.

Lets Build a Stand. These build instructions are based on the original Delta Lathe requirements. This is the height at which your lathes center to be.

This wood lathe is made from plywood wood screws drill sander and glue. Follow the cut list and cut the 24 and 26 boards down to final size. To make this go quicker I use my data stacked in my table saw.