How To Make A Wood Spoon On A Lathe

The spoon pattern shown below can be resized and printed to match your piece of wood.
How to make a wood spoon on a lathe. If you dont have a bandsaw you could do this with a. Used the bandsaw to cut along this Line. Using the bandsaw I rough cut the form drawn.
Cutting board oil also works Tools-Wood lathe-Band saw-Belt sander or other electric sander its possible to get away with just hand-sanding but your hands may fall off in the process-Dremel with several drum-sanding bits for carving out the bowl of the spoon. After the first five slabs from center have been cut the grain changes enough that the handles would be weakened so I stop there. If playback doesnt begin.
On my cut spoon I marked out the edges or walls of the spoon. The spoons are marked out using a template prepared for the project and cut on the band saw. With the dimensions of this board I should be able to make up to 4 spoons.
How to Create a Wooden Spoon using HAND TOOLS. Possible dimensions for your wooden spoon. The first bandsaw cut is down the middle of the slab so as to make ballancing each cut easier and to check for grain changes.
How To Make A Wooden Spoon On The Lathe Woodturning Project - YouTube. Next I took a marker and drew a line freehand halfway along the length of the bead. How to Make Wooden Spoons - YouTube.
Step 2 Trace the spoon pattern onto the wood with a pencil or marker. Some spoon makers turn a blank on the lathe. Next I go to the lathe and put it between centers and turn it down into a round handle and spoon.