How To Make A Metal Lathe Parting Tool

Parting can be seen as simply cutting a groove in a workpiece that is so deep that it cuts the workpiece off the bar.

How to make a metal lathe parting tool. So I figured that making a new lathe tool from scrap metal would be a perfect beginner metal lathe project. Lathes are a common part of professional and amateur workshops and are highly versatile tools. Trusted China Suppliers Verified by SGS.

This Video Will Show the Viewer How to Select the Proper Cutting Tool for Lathe Operations - Basic Tutorial - SMITHY GRANITE 3-in-1Helpful Quote from Video T. I then cut the end of the blade off to square it off and I cut and ground down the teeth. The tip of the tool should be exactly perpendicular to the workpiece.

I took a practice cut on some 1 diameter aluminum rod. The idea is to cut one segment out of the saw disk with a carbide tooth on it and secure it onto a shank made from mild steel milled to 38 8 mm square one and half inches long. This can be done several ways.

This is two parts. Make sure the leadscrew is in the neutral position so thatthe leadscrew is not moving. The blade holder and a bar I milled and drilled and tapped 14-20 to bolt to the blade holder that holds the whole assembly in the tool holder.

Make Your Own Beading and Parting Tool from 8mm HSS tool blank. I got it looking nice and shiney looked pretty good. Not a very good shot but it does show the thickness.

If the tool is alittle high it will have a tendency to climb the work. Parting is one of the most misunderstood machining operations on the lathe. This video covers how to properly grind the tool how to set the tool so it is ri.