How To Clean Wood Prior To Painting

After removing the paint treat the wood with a medium-grained sandpaper to clean off the hardened fine paint particles and possible small burns.

How to clean wood prior to painting. Then mix up a bucket of cleaning solution comprised of one to two cups white vinegar and a half-tablespoon of a good grease-cutting dish soap like Dawn. Create a ratio of 6040 alcohol. Clean the wood surface thoroughly.

Sanding produces dust which may make it difficult for new paint to stick. Scrub at the wooden surface to kill and remove mold and mildew. If you have an oil based paint on your wood then Id clean them with TSP if you intend to repaint that wood.

Another thing you should do is to look for soft crumbly wood which could indicate the presence of dry or wet rot typically occurring in hot damp climates. Steps to take for cleaning wood before staining is similar to painting. You want to remove any old paint flakes or dust thats been left on the surface.

As such you should wipe the old wood surface with a mixture of 1 cup bleach 1. Soak a sponge or scrub brush in the cleaning solution. If you do use TSP then I would also clean the residual TSP off the piece of furniture with a clear water wash or denatured alcohol.

Use an ordinary sponge mop to clean your ceiling and walls thoroughly with TSP and water. But there is no point whatever in cleaning bare wood with TSP or latex painted wood with TSP. TSP trisodium phosphate - sold in the paint aisle of Lowes.

Scrub down the section with a prepared TSP-water solution. For smaller wood items like furniture wash the wood. Once you are done with that bring in tack cloth to give proper finishing to the cleaning procedure.