How To Clean Up After Sanding Lead Paint

Spray areas of chipped or peeling paint thoroughly with a spray bottle filled with water.
How to clean up after sanding lead paint. Vacuum the floor - vacuums with HEPA filters work best. There are a few different ways you can remove this residue but through trial and error the most effective way for me has been through the use of mineral spirits and steel wool. Lead Paint Safety Practices.
Avoid using an electric sander to smooth or remove lead paint. The process is called sanding because the main element used for wearing out the fibers is sand. Only a respirator that is NIOSH- or MSHA-approved with a HEPA filter will remove lead dust from the air.
Keep in mind that you dont have to remove all the paint just loose flaking areas. Clean floors window frames and sills and other surfaces weekly with warm water and all-purpose cleaner. If using contractor bags apply gooseneck taped seals.
CLEAN the job site when work is finished. Using a torch to flame off old paint. Open-blast cleaning of storage tanks before recoating poses a pollution hazard.
Then try to limit your sanding to hand-sanding which. If old paint is not handled properly lead dust and paint chips can remain in the home or on the garden years after the work is completed. If you want to remove all the paint compare the cost and time of other options.
If it is seriously dirty steam clean after a thorough vacuuming. You may have to take down the plastic curtain to remove the carpet. Otherwise they would not stick to the wood properly.